Reactor 275 Carbon - Elite

Reactor 275 Carbon - Elite

Nukeproof

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result the specification may differ from those shown in the images. Please refer to the specification table for accurate information.

Specifications

Frameset
  • Frame
    Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
  • Fork
    Fox 36 Float, Performance Elite Series, Grip 2 Damper, 150mm, 44mm Offset, BOOST, Black (SHORT ID: D6GC)
  • Rear Shock
    Fox Float DPX2, Performance Elite Series, 3 Position, LV EVOL, Custom CL, DRL, Rezi A F F tune, 210x55mm, Bearing End, 1x 0.3 spacer fitted.
Drivetrain
  • Rear Derailleur
    Shimano SLX M7100, SGS 12-Speed, Shadow Plus
  • Shifter
    Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV
  • Crank
    Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline
  • Bottom Bracket
    Threaded 73mm BSA
  • Cassette
    Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T
  • Chain
    Shimano SLX M7100 HG 12-speed Inc Quicklink
Components
  • Brakes
    Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins
  • Rotors
    Shimano SM-RT66, 203mm Shimano SM-RT66, 180mm
  • Seatpost
    Brand X Ascend internal w Shimano SL-MT500-IL Remote lever, M:150mm drop; L/XL:170mm drop
  • Saddle
    Nukeproof Horizon SL, Black
  • Handlebar
    Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm)
  • Stem
    Nukeproof Horizon, 50mm, Black
  • Grips
    Nukeproof Sam Hill Signature
  • Headset
    Nukeproof, 44-56 IITS
Wheels
  • Wheels
    (F) DT Swiss M1900 SPLINE 27.5", 6 Bolt, 110x15mm, (R) DT Swiss M1900 SPLINE 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm
  • Wheel Size
    27.5"
  • Hubs
    (F) Boost 148x12mm, (R) Boost 148x12mm
  • Tires
    Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR
Weight
  • Weight
    14.5Kgs/31.9lbs (Tubeless)
More Info
Mountain bike pricing and specifications are ever changing. This info was last updated March 21, 2022.
See something we missed?

Get the email for busy mountain bikers.

Discover the best products + gear, and learn about deals from brands you love.

Reviews

0.0
Rated 0.0 out of 5
0.0 out of 5 stars (based on 0 reviews)
Excellent0%
Very good0%
Average0%
Poor0%
Terrible0%

Your first-hand experiences really help other mountain bikers. Thanks!

There are no reviews yet. Be the first one to write one.